Introduction
The High Precision / High Pressure Syringe Pump is an advanced system designed for accurate, stable, and controlled fluid injection in laboratory and research applications. Equipped with an industrial servo motor, precision gearbox, and closed-loop control system, the pump provides precise control of flow rate, pressure, and injection volume.
Its dual-cylinder configuration enables continuous, uninterrupted injection during high-pressure processes, making it suitable for specialized applications in petroleum engineering, reservoir engineering, and laboratory research.
This equipment is designed and manufactured by PPA Company.
Advantages
- High injection accuracy and stable flow control
- Continuous and uninterrupted fluid injection
- High-pressure operation up to 700 bar
- Simultaneous control of flow rate, pressure, and volume
- Industrial servo motor with encoder feedback
- Smooth and precise movement using a ball screw and Linear Guide
- Programmable injection profiles
- Data storage via USB
- Multi-layer safety protection system
Applications
The syringe pump is suitable for a wide range of precision fluid injection processes, including:
- Core Flooding experiments
- Reservoir engineering and Enhanced Oil Recovery (EOR) studies
- Precision injection of acids, water, gases, and chemicals
- Flow Assurance studies
- High-pressure and HPHT experiments
- Precision fluid injection and dosing in laboratory research
Operation
Fluid inside the two cylinders is displaced through a precision motion system consisting of an industrial servo motor, planetary gearbox, ball screw, and linear guide. The system delivers the fluid at a programmable flow rate with high stability and accuracy.
An integrated digital controller uses a closed-loop control algorithm to continuously monitor and regulate the injection parameters. The dual-cylinder configuration enables continuous injection, while the 7-inch touchscreen provides an intuitive interface for defining and controlling different injection profiles.
Technical Specifications
- Number of Cylinders: 2
- Cylinder Dimensions: 65 mm diameter × 300 mm length
- Injection Volume: 1 μL to 80 mL
- Flow Rate: 0.001 to 80 mL/min
- Maximum Operating Pressure: 700 bar
- Motion Drive: Industrial servo motor with encoder feedback
- Gearbox: High-precision planetary gearbox with very low backlash
- Motion Transmission: Ball screw
- Linear Guidance: Linear Guide
- Control System: Dedicated digital controller with closed-loop control
- User Interface: 7-inch color touchscreen
- Data Storage: USB
- Fluid-Contact Materials: Stainless Steel 316L and PTFE
- Safety System: Internal pressure sensor, E-Stop, and mechanical limiter
- Power Supply: 220 V AC
The High Precision / High Pressure Syringe Pump, manufactured by PPA Company, provides a precise and reliable solution for controlled fluid injection at high pressures and is suitable for a wide range of advanced laboratory and research applications.
